If you find a lower advertised price on any Magnum Energy product, give us a chance to match or beat it. In most cases we can!

Send us an e-mail at sales@donrowe.com or call us at 1-800-367-3019.

-- MS Series--
Reliable Mobile Power from
Magnum Energy

The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. The MS-Series is available in 2000, 2800 and 4000 watt models.

MS Series Inverter/Chargers are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

Install the MS Series in four easy steps: simply
connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

All MS Series Models Feature:

• Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor
  corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Power Factor Corrected (PFC) Charger: Uses less energy from a generator than a standard charger – using 25-30% less AC than standard chargers.
• Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.
• Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
• Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
• Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded transfer relay: 60 Amp transfer service is available on all models.
• Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.

  Click here to download the user guide
  Click here to download the spec sheet

These additional MS Series are available by special order.
Call 1-800-367-3019 to order.

Battery Monitor Kit
Acts as "fuel gauge" for your battery bank.

* The ME-BMK requires a Magnum Inverter with a "Network" port and a ME-RC50 remote with revision 2.0 or higher.

ME-RC50 Remote Control
For convenient finger-tip operation, including the new one-knob™ programming.

The ME-RC50 Remote Control is simple to use, yet allows full set-up of all the adjustable parameters available in the MS Series inverters. The ME-RC50 also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.

Auto Gen Start (AGS)
Automatically starts and stops your generator based on temperature or battery voltage.

The ME-AGS-N Auto Generator Start can automatically start your generator based on battery voltage or inside temperature. Starts most diesel or gas generators. Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock.

Click here for information on battery cables or to purchase different size cables

Click here for information on DC in-line fuses