Home
—> Inverters —> Inverter-Chargers

MS2000 & MS3000
Sine Wave Inverter / Charger

An affordable high performance sine wave inverter/charger
Designed for Marine Applications to power
advanced onboard electronics.

MS2000 Inverter/Charger
click to enlarge image

Xanbus Enabled

Designed for marine applications to power advanced onboard electronics, the MS models feature 2000 watts (or 3000 watts) of sine wave output and an advanced three-stage battery charger, together with industry-standard networking capability.


The Xantrex MS Models are an ideal solution for your Marine power requirements, delivering up to 2000 watts (or 3000 watts, depending on model) of sine wave output from your battery bank. This allows you to power simultaneous applications including microwaves, entertainment systems, computers and power tools without adding distortion or interference.

Its 100/150 amp, power factor corrected charger ensures that your batteries are recharged quickly, using significantly less AC input current to produce the same high output charge current.

Designed for easy installation and enhanced reliability, the MS2000 and MS3000 come with a large AC wiring box, side-mounted DC connections and a built-in 30 amp transfer switch that automatically transfers between inverter power and incoming AC power.

Features:

  • 2000 or 3000 watt inverter with 250% surge for five seconds
  • True sine wave output to power the latest appliances and electronics
  • 0.95 power factor corrected multi-stage charger for fast, efficient charging
  • Xanbus network enabled (compatible with NMEA network protocol)
  • Meets UL458 marine standards and FCC Class B regulations
  • Advanced diagnostics and field upgradeable software
  • Full power output at 122ºF (50ºC)
  • Built-in 10A Echo-charge recharges auxiliary or starter batteries (MS2000 only)
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • Power sharing reduces charging current to prevent tripping of AC input breaker
  • Drip shield for UL marine compliance
  • Two year warranty

Protection Features:

  • Battery over voltage and under voltage protection
  • Over temperature protection
  • Automatic overload protection
  • Short circuit protection


System Control Panel
(required accessory for MS/RS Series)

Quick and comprehensive control of MS and RS inverter/chargers

See information below

MSRP: $258.00
Our Price: $235.00



Automatic Generator Start
(optional accessory for MS/RS Series)

Automatic Generator Starting Device for networked MS and RS inverter/chargers

Compatible with popular generators, such as Onan, Kohler, Westerbeke, Northern Lights, Generac and Powertech (call Xantrex at 800-446-6180 for compatibility)

MSRP: $207.00
Our Price: $189.00

The MS2000 and MS3000 are powerful, easy-to-use sine wave inverter/chargers featuring an upgradeable design and built-in networking. Produces clean pure power that's perfect for your navigation equipment, home theatre components, microwaves, power tools, and lights.

MS Series Inverter/Chargers are simply the most advanced and easy to use on the market. Premium true sine wave output and a high surge capability will power onboard appliances and electronic devices, including navigation equipment, home theatre components, microwaves, power tools, and lights.

A power factor corrected three-stage charger provides long battery life by recharging batteries more quickly, while using less AC power. The stress-tested, UL458 Marine design delivers reliable power in demanding marine conditions.

An aluminum chassis, conformal-coated components, and high-temperature operation guarantee long-term trouble-free performance. They also meet strict electromagnetic interference standards designed to minimize interference with radios and other onboard electronics.

Xanbus EnabledMS Inverter/Chargers are Xanbus Enabled, so it’s easy to connect network-enabled accessories as well as share power status and diagnostic information with other devices. Xanbus makes power management less complex, while intelligently making the best use of available power resources. The inverter/chargers have built-in flash memory so their software can be upgraded to take advantage of new features and system enhancements.

 

MS2000 by Xantrex
2000 watt 12 volt Pure Sine Wave Inverter/Charger

MSRP: $2210.00

Our Price: $2025.00

Out of Stock

 

MS3000 by Xantrex
3000 watt 12 volt Pure Sine Wave Inverter/Charger

MSRP: $2995.00

Our Price: $2745.00

809-3010 MS3000

Out of Stock


Click here to purchase
Battery Cables



Click here to purchase
Class "T" Fuse & Holder


Electrical Specifications - Inverter MS2000 MS3000
Output power (continuous) 2000 watts 3000 watts
Surge Rating (5 second) 5000 watts (42A) 7500 watts (60 A)
Output voltage 120VAC 120 VAC
Output frequency 60 Hz +/- -0.05% (crystal controlled)
Output waveform Sine Wave <3% THD
Peak efficiency >92% >90%
Efficiency (full load) >87% >85%
No load power draw (search mode) <14.4 W <20 W
AC transfer switch 30 A Two legs at 50 A (split phase in), Two legs at 30 A (dual in)
Transfer time 20 ms (typical)
   
Electrical Specifications - Charger MS2000 MS3000
Output current 100 ADC 150 ADC
Battery voltage (nominal) 12 VDC 12 VDC
Battery voltage range 10.0 - 15.5 VDC 10.0 - 15.5 VDC
Charge Control 3 stage w/ manual equalize
Charge temperature compensation Remote battery sensor (included)
Efficiency 85% typical
AC input power factor 0.95
Input current (for 100A charging) 15 Arms (nominal) 22 Arms (nominal)
AC Input voltage 120 VAC
AC Input voltage range 90 - 135 VAC
Compatible battery types Wet / Gel / AGM
Echo-charge output current 10 A Not applicable
General Specifications MS2000 MS3000
Operating and storage temperature range 14°F - 122°F (-20°C - 50°C)
Dimensions (H x W x L) 7.5 x 13.15 x 16" (208 x 336 x 406 mm)
Weight 68 lb / 30.9 kg 70.0 lb / 31.8 kg
Warranty Two Years
Required Part No. 809-0910 System Control Panel
Required Network Cable, 809-0940 or 809-0941 25' or 50'
Optional Automatic Generator Start 809-0910
Regulatory Approvals CSA/NRTL certified to CSA 107.1, UL 458 (Marine supplement).
ABYC designed to Marine Standards
FCC Class B/Industry Canada Class


MS2000/MS3000 System Control Panel - Inverter/Charger set-up and control
(this is a required accessory available as an add-on when you purchase your MS2000 or MS3000 inverter/charger from DonRowe.com)

RS2000 / MS2000 System Control Panel

Xantrex system components expand power system functionality

The System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic information in one central location. Large keypad buttons, an intuitive onscreen menu system, and plain text status messages make it easy to configure and operate. By providing basic controls for other devices connected to the network, the SCP reduces the complexity of separate control panels for each device.

The SCP is Xanbus Enabled and easily connects to MS and RS Inverter/Chargers and other devices with off-the-shelf network cables, making installation quick and easy. Built-in flash memory makes the SCP’s software upgradeable to take advantage of new features and system enhancements.

Product Features

  • Compatible with MS and RS Inverter/Chargers
  • Graphical 128x64 pixel LCD display
  • Large, tactile keys
  • Meets UL458 Marine and RV standards
  • Control and display of multiple networked devices
  • Xanbus Enabled



Power Inverters || Battery Chargers || Inverter Cables || Inverter Accessories || AGM Batteries
Travel Accessories || Power Inverter FAQ || Document Library

About Us || Contact Us || Privacy, Security, Returns || Refer a Friend || Shipping || Site Map || Home

donrowe.com
800-367-3019
sales@donrowe.com
P.O. Box 522, Monroe, Oregon 97456
Phone: 541-847-5782 || Fax: 541-847-6230
Hours: 8:00 am to 4:00 pm Pacific Time, Monday - Friday

© 2000-2011 ~ All rights reserved ~ Powered by: