Home
—> Inverters —> Inverter-Chargers

DR Inverter/Charger
120 VAC / 60 Hz

Need an affordable, top-quality, mid-sized inverter, with built-in battery charger, and automatic transfer?

The DR Series (1500, 2400, or 3600 Watt) Modified Sine Wave Inverter may be all you are looking for and more .....


click image for larger view



Features of the DR Series:

  • Quiet, high efficiency operation
  • Front panel LED indicators and adjustable switch selectors
  • Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries
  • Three-stage 35 amp-120 amp battery charging (bulk, absorption, and float) for increased performance
  • Low battery, overload, and high battery, over temperature protection circuitry
  • Fast switching (grid to battery and battery to grid) for backup power
  • Low idle current (less than one watt) conserves energy when no loads are present
  • Easily stacked for 240/120 VAC output (requires two units)
  • Generator compatible

DR 1512 by Xantrex
1500 / 2400 12 volt Inverter/Charger
Regular Price: $
949.00
Our Price: $779.00

Out of Stock


DR 2412 by Xantrex
2400 / 4200 12 volt Inverter/Charger
Regular Price: $
1395.00
Our Price: $999.00

Out of Stock


DR2424 by Xantrex
2400 / 4200 24 volt Inverter/Charger

Regular Price: $
1395.00
Our Price: $999.00

Out of Stock



DR 3624 by Xantrex
3600 / 7500 24 volt Inverter/Charger
Regular Price: $
1595.00
Our Price: $1,239.00


Out of Stock

 

The DR Inverter/Charger by Xantrex provides dependable modified sine wave power for businesses, homes and workshops.

Available in 1500, 2400 or 3600 watt models, it can power most common electrical appliances such as lights, televisions, cash registers, refrigerators, washing machines, computers, and power tools.

The DR’s high surge capacity gives it the ability to start difficult motor loads. Once set up, all functions of the inverter/charger are fully automatic.

Benefits of the DR Series:

Convenience: Enjoy using standard home electrical appliances. Converts 12 or 24 volt battery power into 120 volt AC. Hand tools, lights, TV's, refrigerators, microwaves, computers - almost all household appliances can be powered by your batteries.

Automation: Plug into utility power or run your generator and the inverter starts charging your batteries and automatically transfers up to 120 amps of additional AC power to your AC electrical system. It charges rapidly and completely without overcharging and maintains the full charge indefinitely. The synchronous-rectification design charges batteries in three stages- bulk, absorption, and float.

Protection: For optimum battery charging, a unique temperature compensation circuit utilizes an optional remote probe to automatically adjust charge voltage to battery temperature. In the inverter mode, if your batteries run seriously low, an adjustable over-discharge protection circuit automatically turns off the inverter to protect your batteries. Other design features protect against undercharging, overload, and accidental connection of an AC source to an AC outlet.

Easy to use: Easy to understand LEDs indicate status and switches control functions such as load watch mode, over-discharge protection and others.

Rugged: Designed for maximum service, the DR series offers a powder-coated chassis, stainless-steel fasteners, conformal-coated circuit board, and gold-plated connectors. AC wiring terminates cleanly inside the unit. Features full 2 year warranty.

Versatile: Use for remote power, residential backup power, service vehicles, solar and wind installations, industrial applications.

 


Electrical Specifications DR1512 DR2412 DR3624
AC input Voltage 120 VAC 120 VAC 120 VAC
AC Input Voltage Range 90-140 VAC 90-140 VAC 90-140 VAC
AC Input Current * 55 amps AC (30 amps AC Pass Through & 25 amps charging)
Continuous Power (@ 25° C) 1500 VA 2400 VA 3600 VA
Efficiency (Peak) 94% 94% 95%
Output Voltage (RMS) 120 VAC 120 VAC 120 VAC
Output Voltage Regulation: Typical +/- 2%
                                        Maximum +/- 5%
Frequency (Nominal):         +/- 0.04% crystal controlled 60 Hz 60 Hz 60 Hz
Continuous Output (@ 25° C) 12.5 amps AC 20 amps AC 30 amps AC
Surge Capability:                5 Sec Rating 2400 watts 4200 watts 7500 watts
                                        1 mSec 38 amps AC 77 amps AC 110 amps AC
Automatic Transfer Relay 30 amps 30 amps 30 amps
DC Input Voltage (Nominal) 12.6 VDC 12.6 VDC 25.2 VDC
DC Input Voltage Range 10.8-15.5 VDC 10.8-15.5 VDC 21.6-31 VDC
DC Current at Rated Power 165 amps DC 280 amps DC 210 amps DC
Short Circuit Current 400 amps DC 800 amps DC 720 amps DV
Idle Consumption (Typical Full Voltage) <9 watts <12 watts <13 watts
Search Mode Consumption <1 watt <1 watt <1 watt
Low Battery Protection (Enabled) 11 VDC 11 VDC 22 VDC
Maximum Charge Rate (Adjustable) ** 70 amps DC 120 amps DC 70 amps DC

Mechanical Specifications DR1512 DR2412 DR3624
Specified Temperature Range: Operating 32° F to 122° F (0° C tp 50° C)
                                            Non-operating -67° F to 167° F (-55° C to 75° C)
Enclosure Type Indoor, ventilated, steel chassis with powdercoat finish
Unit Weight 35 lb (16 kg) 45 lb (21 kg) 45 lb (21 kg)
Shipping Weight 39 lb (18 kg) 49 lb (22 kg) 49 lb (22 kg)
Inverter Dimensions *** 8.5" H x 22" W x 7.25" D (21.6cm x 55.9cm x 18.4cm)
Shipping Dimensions 13" H x 25" W x 12" D (33 cm x 63.5cm x 30.5cm)
Mounting Mount in horizontal position on vertical wall or surface
Altitude                                  Operating 15,000' (4,572 m)
                                             Non-operating 50,000' (15,240 m)

Standard Features and Options DR1512 DR2412 DR3624
Forced Air Cooling Standard forced air variable speed fan
Charging Profiles Eight standard with two equalize profiles
Three-stage Charging Standard three-state (bulk, absorption, and float)
Series Stacking Operation (Requires Two Units) Standard for 120 VAC 60 Hz units
Battery Temperature Sensor (optional) BTS - optional remote battery temperature sensor for increased battery performance
Remote Control (optional) RC8 - optional remote control and status indicator
Stacking Interface (optional) DRI - optional stacking interface cable
Conduit Box (optional) DRC8 - optional side mount conduit box for code-compliant DC wiring connections

Common Specifications DR1512 DR2412 DR3624
Waveform Modified sine wave
Load Sensing (Inverter Mode) Adjustable 5 to over 1000 watts (5 watts default)
Power Factor (Allowed) -1 to 1 pf
Listings ETL Listed to UL 1741 and CSA 22.2 No 107.1 M1 Standards
Warranty Two Years

 * Required for full pass through and full charging
 ** Depends on line voltage
 *** Allows for hardware extensions, such as mounting rails, DC terminals, and front panel controls.


Power Inverters || Battery Chargers || Jump Starters || Inverter Cables || Inverter Accessories
Home Solar || Portable Solar || Power Inverter FAQ || Document Library

About Us || Contact Us || Privacy, Security, Returns || Refer a Friend || Shipping || Site Map || Home

DonRowe.com
800-367-3019
sales@donrowe.com
P.O. Box 522, Monroe, Oregon 97456
Phone: 541-847-5782 || Fax: 541-847-6230
Hours: 8:00 am to 4:00 pm Pacific Time, Monday - Friday

© 2000-2012 ~ All rights reserved ~ Powered by: