|
For safe operation
of your inverter, Xantrex's Class T Fuse and Holder is a recommended accessory
that offers you over-current protection.
You
may want to also order a 6" piece of red battery cable to connect the fuse
holder to the battery... click here to order.
|
TBF200 - 200 Amp Class T fuse & holder
Our
Price: $53.00
|
|
TBF300 - 300 Amp Class T fuse & holder
Our
Price: $75.00
|
|
TBF400 - 400 Am Class T fuse & holder
Our
Price: $75.00
|
|
The Battery Fuse and Holder
has a cover that protects from inadvertent contact with the battery fuse and posts,
and the fuse is Class-T rated to allow for momentary surges without blowing.
As current passes through
any cable, heat is generated. If the inverter draws more current than the cable
can handle due to heavy loads, excessive heat is produced. The fuse can handle
a certain amount of excess current but is designed to blow when the safe limits
are exceeded, protecting the cable from deterioration or permanent damage.
Proper sizing of the cable
and fuse are important in ensuring that these hazards are avoided. For specific
recommendations, refer to the inverter or inverter/charger owner’s manual ( see
our Document Library )
Features:
- DC rated, UL listed high
current Class-T fuse
- Protective clear removable
cover protects against inadvertent contact
- Available in 200, 300,
350 and 400 amp models
- Dual post design to reduce
arcing
- Easy to change, user replaceable
fuses
Specifications:
- Dimensions (HxWxD): 2.5
x 2.0 x 7.0”
- Weight: 1.5 lb
- Hardware: 5/16” (on TFB200)
- 3/8” (on TFB300, TFB350
and TFB400)
|
