| Remote
Switches for Power Inverters |
|
Wagan Remote Switch |
For Wagan 3000, 5000, 5000C, 8000
and 10,000 (only) |
|
Remote
Control Switch with 15' cord
(On/Off push button, with LED indicator light to indicate when inverter is on.
Dual sided tape for easy mounting)
* EL2323 Switch
- $17.95
|
|
XPower Plus Remote Switch |
For Xantrex xPower 1200 Plus
and 1750 Plus Inverters (only) |
Xantrex
Remote Control Switch with 20' cord
(On/Off rocker switch, no LED indicator light)
* 808-9500 Switch
- $19.95
|
|
Xantrex PROwatt SW Remote Switch |
For Xantrex PROwatt SW 600, 1000
and 2000 (only) |
Xantrex Remote Control Switch with 25' cord
(On/Off push button, power LED indicator light and ignition lockout functions)
808-9001 Switch - $24.95
|
|
Cobra Remote Switch |
| For Cobra 1000, 1500 and 2500 (only) |
Cobra
Remote Control Switch with 20' cord
(On/Off push button, power LED indicator light)
CPI-A20 Switch - $19.95
|
|
Voltec Remote Switch |
| For Voltec 1000 watts and above (only) |
|
For models VTC1000, VTC1500, VTC2000 and VTC3000
only. Voltec
Remote Control Switch with 20' cord
(On/Off push button, power/fault LED indicator light)
10-00486 Switch - $17.95
|
|
Samlex Remote for PSE and PST Series
|
| For PSE and PST Series Inverters by Samlex (600 watts and above only) |
Samlex
Remote Control Switch with 18' cord
(On/Off push button, with LED indicator light to indicate when inverter is on.
Dual sided tape for easy mounting)
* RC-15 switch - $19.95
|
|
Samlex Remote for S1500 Series |
| For S1500 Series by Samlex (only)
|
Samlex Remote Control Switch with 10' cord.
(Status monitoring, On/Off
activation and power saving enable/disable activation)
CR-5 switch - $28.95
|
|
Samlex Remote for SA, SK and ST Series |
For SA, SK and ST Series by Samlex
(700 watts and above only) |
|
Samlex Remote Control Switch with 10' cord.
(Status monitoring, On/Off
activation, and remote overide and ignition lockout functions)
S-R8 switch - $27.95
|
|
* Remote
switch cuts power to the inverter's AC output only, not to the inverter itself.
Therefore the inverter is still experiencing a no-load draw. |
