Home
—> Inverters —> Inverter-Chargers

Freedom SW Series
Pure Sine Wave Inverter / Chargers

POWERFUL. CONFIGURABLE. VERSATILE...

Freedom SW Series Inverter/Charger by Xantrex
click to enlarge photo

2000-watt 12-volt Inverter/Charger
(815-2012 - $1,499.00)

3000-watt 12-volt Inverter/Charger
(815-3012 - $1,799.00)


Product Features:

  • Pure sine wave output to operate sensitive electronics
  • Advanced configuration options for customized applications
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • Power factor corrected multi-stage charger for fast, efficient charging
  • Temperature compensated charging for most climate conditions.
  • Ignition lockout feature helps to minimize unnecessary battery drain (when used with On/Off Remote Panel - sold separately)
  • Conformal coated circuit boards for humid environments
  • Dual input / Dual output AC interface for 3000 W model only
  • Ability to charge batteries drained to extremely low voltage

Parallel and Series Stacking:

  • Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode.
  • Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output. (AC source must be split phase, requires Stacking Cable, part# 808-9005).

User Guide  Click here to download the stacking guide

Protection Features:

  • Battery over-voltage and under-voltage protection
  • Over-temperature shutdown
  • Automatic overload protection
  • Short-circuit protection
  • Integrated, resettable AC breakers

Applications:

  • Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.

-- Freedom SW Series --
Pure Power. True Value.

The New Generation of Freedom SW Series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generatorą when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models now offer both parallel and series stacking capability and are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

User Guide  Click here to download the user guide
User Guide  Click here to download the install guide
Spec Sheet  Click here to download the spec sheet



Freedom SW 2000
815-2012 by Xantrex
2000 watt 12 volt Inverter/Charger
(100 amp charger)

Our Price: $1499.00



Freedom SW 3000

815-3012 by Xantrex


3000 watt 12 volt Inverter/Charger
(150 amp charger)

Our Price: $1799.00


Freedom SW Series Accessories

System Control Panel (809-0921)
Our Price: $249.00


Automatic Generator Start (809-0915)
Our Price: $199.00


Xanbus Network Cables

3ft Cable (809-0935)
$6.75
25ft Cable (809-0940)
$26.00
75 ft Cable (809-0942)
$38.00

GFCI Outlets (808-9003)
Our Price: $34.00


Freedom Remote Panel (808-9002)
Our Price: $24.00


Freedom SW Remote Panel
Provides remote on / off and ingnition lockout enable / disable capabilty.

Xantrex Freedom SW Remote Panel The Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter to turn the Freedom SW Inverter ON or OFF from a more convenient location. The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter. When this feature is enabled, the Freedom SW Inverter will shutdown if the vehicle's ignition is not engaged (not in ACC position) to prevent unnecessary battery drain. Includes a 25' communications cable.

User Guide   Click here to download the user guide



Inverter Cables Click here for information on battery cables or to purchase different size cables


Inverter Fuses Click here for information on DC in-line fuses

Xanbus System Control Panel
Provides quick and comprehensive control of the Freedom SW Series.

Xantrex Freedom SW System Control Panel (SCP)The Xanbus System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic information in one central location. Large keypad buttons, an intuitive on screen menu system, and plain text status messages make it easy to configure and operate. By providing basic controls for other devices connected to the network, the SCP reduces the complexity of separate control panels for each device.

Note: Does not include network cable.

User Guide  Click here to download the user guide


Automatic Generator Start (AGS)
Automatically start and stop a generator as needed with the Freedom SW Series.

Xantrex Freedom SW Automatic Generator Start (AGS)The Automatic Generator Start can automatically activate a generator to provide the power to recharge depleted batteries or assist with heavy loads. Compatible with popular generators, the AGS adds intelligence to power management and eliminates time spent monitoring batteries and inverter loads.

Note: System Control Panel (SCP) required for operation. Does not include network cable.

User Guide  Click here to download the user guide


Xanbus Network Cable
Connects Xanbus enabled devices.

Xanbus Network CablesThe Xanbus Network Cable is available in 3ft, 25ft and 75ft lengths. Compatible with the Freedom SW System Control Panel (SCP), Automatic Generator Start (AGS) and the Freedom Sequence Intelligent Power Manager.


Ground Fault Circuit Interrupter Provides dual GFCI outlets for plugging directly into the Freedom SW Series.

Xantrex Freedom SW GFCI OptionThe GFCI option to enables you to plug electronics directly on the Freedom SW Series inverter/charger. This ground fault protected AC output is also a requirement for certain mobile applications. The GFCI plate can be mounted directly and quickly. Compatible with both old and new generation Freedom SW products.


Electrical Specifications - Inverter
Model Freedom SW 2012 Freedom SW 3012
Output power 2000 W
(continuous at 30° C)
3000 W
(continuous at 40° C)
Surge Rating (5 seconds) 4000 W 6000 W
Output current 17 AAC 24 AAC
Peak output current 55 AAC 80 AAC
Output frequency 60 Hz +/- 0.2 Hz
Output voltage 120 VAC
Output waveform Pure sine wave
Optimal efficiency 90%
No-load power draw (inverting) < 3 ADC
Standby power draw (inverter off) < 0.25 ADC
Input DC voltage range 10 - 16 VDC
Low battery voltage shutdown cut-off 10.5 VDC (selectable)
High battery voltage shutdown cut-off 16.5 VDC (selectable)
AC connections Single phase in / out Split phase in / dual out,
Dual in / dual out
 
Electrical Specifications - Charger
Model Freedom SW 2012 Freedom SW 3012
Output current (maximum) 100 ADC 150 ADC
Output voltage 12 VDC
Output voltage range 3.0 - 16.0 VDC
Charge control 3 stage with manual equalize
Charge temperature compensation Battery temperature sensor (included)
Optimal efficiency > 85%
AC input power factor (maximum charge) > 0.98 > 0.95
Input current (for maximum charging) 15.8 AAC RMS nominal 22 AAC RMS nominal
Input AC voltage 120 VAC
Input AC voltage range 85 - 140 VAC
Dead battery charge > 3.0 VDC > 3.0 VDC
Supported AC input types Single input (up to 30 A) Split phase
(up to 30 A per line)
Dual input
(up to 30 A per line)
 
General Specifications
Model Freedom SW 2012 Freedom SW 3012
Compatible battery types Flooded / Gel / AGM
Transfer relay rating 1 leg of 30 A 2 legs at 30 A each
Transfer time
(AC to inverter and inverter to AC)
< 20 ms
Cooling Fan cooled, temperature controlled
Optimal operating temperature range -4 to 86 °F (-20 to 30 °C) 1700W @ 60 °C -4 to 104°F (-20 to 40 °C) 2600W @ 60 °C
Storage ambient temperature range -67° F to +167° F
(-55° C to 75° C)
-40° F to +185° F
(-40° C to 85° C)
Humidity (operation/storage) ≤ 95% RH, non-condensing
Altitude (operating) 15,000 ft (4,572 m)
Unit dimensions (H x W x L) 7.75 x 13.5 x 15.25" (19.7 x 34.3 38.7 cm)
Unit weight 60.5 lbs (27.5 kg) 69.4 lbs (31.5 kg)
Mounting Deck or wall mount with fans and DC/AC sides facing sideward
Warranty 2 years
Part number 815-2012 815-3012
 
Accessories
Battery temperature sensor Part# 808-0946 - Included
Freedom Sequence Intelligent Power Mgr. Part# 809-0913 - Sold separately
Automatic Generator Start (AGS) Part# 809-0915 - Sold separately
System Control Panel (SCP) Part# 809-0921 - Sold separately
3' Network cable for SCP Part# 809-0935 - Sold separately
25' Network cable for SCP Part# 809-0940 - Sold separately
75' Network cable for SCP Part# 809-0942 - Sold separately
Freedom SW On/Off remote panel Part# 808-9002 - Sold separately
GFCI option Part# 808-9003 - Sold separately
Drip shields Part# 808-9004 - Sold separately
Stacking cable for series stacking Part# 808-9005 - Sold separately
 
Regulatory & Environmental Compliance
Safety CSA 107.1, UL 458 with marine supplement (when used with drip shield, ABYC E11 - Alternating Current and Direct Current Electrical Systems on Boats, and ABYC A31 - Battery Chargers and Inverters
EMC FCC Part 15, Class B
Industry of Canada ICES-0003, Class B


Power Inverters || Battery Chargers || Jump Starters || Inverter Cables || Inverter Accessories
Home Solar || Portable Solar || Power Inverter FAQ || Document Library

About Us || Contact Us || Privacy, Security, Returns || Refer a Friend || Shipping || Site Map || Home

DonRowe.com
800-367-3019
sales@donrowe.com
P.O. Box 522, Monroe, Oregon 97456
Phone: 541-847-5782 || Fax: 541-847-6230
Hours: 8:00 am to 4:00 pm Pacific Time, Monday - Friday

© 2000-2012 ~ All rights reserved ~ Powered by: