Need Help? Call Now! 800-367-3019
Home
|
FAQ
|
My Account
|
My Cart
Inverters
Cables
Accessories
Solar
Chargers
Home
>
Magnum Energy
>
Magnum RD2824 2800W, 24V Inverter/Charger
List Price: $2,092.55
Price: $1,360.15
Sale Price: $
1,299.99
Availability:
Usually Ships in 2 to 4 Weeks
Product Code:
RD2824
Description
Specifications
Related Documents
If you find a lower advertised price on any Magnum Energy product, give us a chance to match or beat it. In most cases we can! Call us at 1-800-367-3019 or e-mail us at
[email protected]
.
The RD2824 Inverter/Charger from Magnum Energy is a modified sine wave inverter designed especially for renewable energy and off-grid applications. It provides a powerful 2800 watts of output and can power a wide range of household appliances including small motors, hair dryers, clocks, and other electrical devices.
The RD2824 is designed to allow easy access to wiring, circuit breakers and controls making installation a breeze. Simply connect the RD2824's output to your distribution circuits or electrical panel, connect your input AC power to the easy-to-reach terminal block, connect the batteries, and then switch it on for power.
The RD2824 has a built-in 80 amp multi-stage Power Factor Corrected (PFC) Charger that uses 25-30% less AC current from a generator than a standard charger. The charger can use up to five different charging stages to help monitor and keep batteries properly maintained. This includes a battery equalization stage and a Battery Saver mode. The Battery Saver stage is designed to keep batteries fully charged over long periods and prevent excessive loss of water in flooded batteries, or drying out of GEL/AGM batteries. The charger also features automatic battery temperature compensation for optimum charging even during extreme temperature changes.
The RD2824 also features two AC input legs at 30 amps each that can be connected together to allow 60 amp pass-thru. It uses the same construction as the ME Series without a neutral bonding relay.
Inverter Specifications
Input
24 VDC
Output voltage
120 VAC, 60 Hz
Continuous Power
2800 VA (23.3 A)
Surge Power (5 sec)
6000 W (50.0 A)
Output waveform
Modified sine wave
Transfer relay
Two 30 A legs
Charger Specifications
Input
120 VAC, 60 Hz
Output Current
80 ADC
Output voltage
24 VDC
Dimensions
13.8 x 12.7 x 8.0 in (349 x 321 x 203 mm)
Inverter weight
42.0 lbs (19.0 kg)
Shipping weight
48.0 lbs (21.8 kg)
Warranty
2 years
See spec sheet for additional info
RD2824 User Guide
RD2824 Spec Sheet
Product Features
Easy-to-install with versatile mounting options
Lightweight aluminum case provides noise reduction and corrosion resistance
Accessible AC access and DC connection design
Convenient on/off switch with easy-to-read LED indicator
5-Stage Power Factor Corrected (PFC) charger
Expanded 60 Amp transfer service
Overcurrent, over-temperature, and high/low battery voltage protection
ETL listed to UL1741 standards
Two-year warranty
Available Accessories
Remote Control (
ME-RC50
). The easy to read LCD screen allows you to monitor your Magnum Energy inverter/charger, set important parameters, and control other Magnum Energy accessories.
Automatic Generator Start (
ME-AGS-N
). Automatically starts and stops a generator as needed.
Battery Monitor Kit (
ME-BMK
). Acts as a "fuel gauge" for your batteries, it monitors your batteries stage of charge and then provides information via Magnum Energy remote control.
Web Monitoring Kit (
ME-MW-W
). The.MagWeb is a power and cost effective tool for remotely monitoring Magnum Energy's inverters and accessories via wireless internet.
Accessories
Magnum Energy ME-RC50 Remote Control
Magnum Energy ME-AGS-N Auto Generator Start
Magnum Energy ME-BMK Battery Monitor Kit
250A Class T Fuse Kit
Sale Price: $199.99
Add
Sale Price: $229.99
Add
Sale Price: $149.99
Add
Sale Price: $79.99
Add
Share your knowledge of this product.
Be the first to write a review »
Search by Brands
Magnum Energy
Samlex America
Xantrex
KISAE
Wagan Tech
Cotek
PowerMax
IOTA
Power Bright
Krieger
/* Login and Checkout fix for Premium Checkout */