 |
 |
 |
|
The Cotek SN-1 PLUS adds network based monitoring and control to Cotek's SR Series inverters, so status checks and settings changes don't require walking up to the panel. It connects over SNMP (Simple Network Management Protocol) for use with network management software, or through its own built in web server for browser based access from any PC on the network. That makes it a natural fit for telecom shelters, data centers, and remote or unmanned installations where the inverter isn't easy to reach.
Once installed, the SN-1 PLUS provides a Status page showing real time output voltage, current, frequency, and load percentage, along with battery voltage and grid status, plus a time stamped event log of inverter history. The System Control page lets an operator power the inverter on or off, mute the buzzer, or set dry contact relay behavior remotely, and the Inverter Config page exposes adjustable protection setpoints, battery and grid over voltage and under voltage thresholds, output voltage and frequency, and charge settings on SRC series units, all without opening the panel. One SN-1 PLUS module covers an entire SR Series system, including systems built from multiple parallel inverter modules.
The module connects through a standard RJ45 port, either to a router with DHCP for network wide access or directly to a PC for local setup, with an LED indicator showing communication status and a reset button to restore default settings if needed. One SN-1 PLUS covers an entire SR Series system, including installations built from multiple slave modules, so there's no need for a module per unit.
Questions about pricing? Call us at 1-800-367-3019 or e-mail us at [email protected].
| General Specifications |
| | Dimensions | | 7.8 x 3.25 x 4.8 in (198 x 83 x 123 mm) | | Shipping weight | | 3.0 lbs (1.4 kg) | | Warranty | | 2 years |
See spec sheet for additional info
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features- SNMP V2C protocol support for integration with NMS platforms
- Built in web server for browser based access with no extra software required
- Real time monitoring of output voltage, current, frequency, load percentage, battery voltage, charge current, and grid voltage and current
- Time stamped event log for inverter history and troubleshooting
- Remote system control
- Adjustable inverter protection setpoints
- RJ45 connection with DHCP or static IP network configuration
- LED status indicator for at a glance communication status with the inverter
- One SN-1 PLUS module covers an entire SR Series system, including multi module installations
- Compatible with Cotek SR Series and SRC Series inverters
- Password protected access
- Configurable battery and grid over voltage/under voltage protection thresholds
- 2 year warranty
Compatible Models
|
|
|
|
|
|
|
