Magnum MSH40242RE 4000W 24V Hybrid Inverter/Charger

Home > Magnum Energy >

Magnum MSH4024RE 24V Hybrid Inverter/Charger

List Price: $3,460.75

Price: $2,249.49

Availability: Unavailable
Product Code: MSH4024RE

Discontinued

Description

Specifications

Related Documents

If you find a lower advertised price on any Magnum Energy product, give us a chance to match or beat it. In most cases we can! Call us at 1-800-367-3019 or e-mail us at sales@donrowe.com.

The MSH-RE Series is a "hybrid" pure sine wave inverter designed especially for home backup power and renewable energy applications. Powerful, yet simple to use, this inverter/charger will provide you with years of trouble-free performance you have come to expect from Magnum Energy.

Why is the MSH-RE Series a "Hybrid"? Most inverters only use one source of energy to power the inverter loads—either from the incoming AC power (i.e., utility or AC generator) or from the batteries. The MSH-RE Series combines the energy from both the AC input and the batteries to power the inverter loads. This feature gives this inverter the ability to recharge the battery when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.

The MSH4024RE, a 24-volt, 4000 watt inverter with 110A charger, has 2 AC inputs – one for generator and one for grid – with each input rated at 60A pass-through. This Renewable Energy model is intended to be used for residential or commercial applications. It has been tested and listed to UL 1741, 2nd Edition for use in the US; and is also certified to CSA C22.2 No. 107.1-01 for use in Canada.

Product Features
- Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.
- Easy-to-install: Install the MSH-RE Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
- Dual AC inputs: The MSH-RE Series comes with two 60 amp AC inputs – a grid input at 60A and a generator input at 60A.
- Interchangeable: The MSH-RE is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The MSH-RE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: The MSH-RE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Buy with ease: The MSH-RE Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP system.
Available Accessories
- Advanced Remote Control (ME-ARC50). This advanced feature remote offers the same simple push button operation of the ME-RC50 with advanced features and setup menus.
- Automatic Generator Start (ME-AGS-N). Automatically starts and stops a generator as needed.
- Battery Monitor Kit (ME-BMK). Acts as a "fuel gauge" for your batteries, it monitors your batteries stage of charge and then provides information via Magnum Energy remote control.
- Web Monitoring Kit (ME-MW-W). The.MagWeb is a power and cost effective tool for remotely monitoring Magnum Energy's inverters and accessories via wireless internet.