MS-PAE Series Pure Sine Wave Inverter / Charger

Made in the U.S.A.

The MS-PAE Series is Powerful, Easy-to-Use
and Cost Effective

-- MS-PAE Series--
Reliable Renewable Power from
Magnum Energy

Product Features:

• Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Power Factor Corrected (PFC) Charger: Uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
• No series stacking required: The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts.
• Parallel stacking: Parallel up to four inverter/chargers for up to 17.6kw of power at 120/240V. The ME-RTR router is required for parallel stacking the MS-PAE Series.
• Choices: The MS-PAE Series comes in 24 and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile mounting: Mount the MS-PAE Series on a shelf or wall.
• Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple ports: The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
• Convenient switches: The MS-PAE Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator..
• Buy with ease: The MS-AE Series is backed by a two-year (24-month) limited warranty.

  Click here to download the user guide
  Click here to download the spec sheet

The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-PAE Series provides two 120VAC output lines that are 180° out-of-phase with each other, so that the combination of the L1 and L2 lines total 240VAC and the voltage between either L1 or L2 and neutral is 120VAC, eliminating the need to purchase two units and stack them together to get 240 volts.

When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.

Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.

If you find a lower advertised price on any Magnum Energy product, give us a chance to match or beat it. In most cases we can!

Send us an e-mail at sales@donrowe.com or call us at 1-800-367-3019.

Battery Monitor Kit
Acts as "fuel gauge" for your battery bank.

* The ME-BMK requires a Magnum Inverter with a "Network" port and a ME-RC50 remote with revision 2.0 or higher.

ME-RC50 Remote Control
For convenient finger-tip operation, including the new one-knob™ programming.

The ME-RC50 Remote Control is simple to use, yet allows full set-up of all the adjustable parameters available in the MS-AE Series inverters. The ME-RC50 also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revison 2.0 or higher remote) using a network connection to the inverter. This remote has convienient finger-tip operation, including the new one-knob programming.

The ME-ARC50 Remote Control is simple to use, yet allows full set-up of all the standard and advanced features available in Magnum inverters. The ME-ARC50 also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.

Auto Gen Start (AGS)
Automatically starts and stops your generator based on temperature or battery voltage.

The ME-AGS Auto Generator Start can automatically start your generator based on battery voltage or inside temperature. Starts most diesel or gas generators. Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock.

The ME-RTR Router provides a user-friendly LCD display that provides parallel capability for MS-PAE Series inverters. Also provides operating information and setup / troubleshooting capabilities for multiple Magnum inverters and accessories.

Click here for information on battery cables or to purchase different size cables

Click here for information on DC in-line fuses