|
Home —>
Inverters —> Inverter-Chargers
 |
ME Series
Inverter / Charger |
Made in the U.S.A.
|
|
The ME Series is Powerful, Easy-to-Use
and Cost Effective
|
click to enlarge photo
|
2000-watt
Inverter with 100-amp Charger
(ME 2012 - $1,120.00)
|
|
2500-watt
Inverter with 120-amp Charger
(ME 2512 - $1,280.00) |
3100-watt Inverter
with 160-amp Charger
(ME 3112 - $1,480.00)
|
|
ME
2012
by Magnum Energy
2000
watt 12 volt Inverter/Charger
(100 amp charger)
Regular Price: $1,592.00
Our Price: $1120.00
|
ME 2512
by Magnum Energy
2500
watt 12 volt Inverter/Charger
(120 amp charger)
Regular Price: $1,846.00
Our Price: $1280.00
|
ME 3112
by Magnum Energy
3100
watt 12 volt Inverter/Charger
(160
amp charger)
Regular Price: $1,999.00
Our Price: $1480.00
|
These additional
ME Series are available by special order.
Call
1-800-367-3019 to order.
|
Part Number
|
Description
|
Our Price
|
|
ME2012-15B
|
2000W, 12V, 100A
PFC charger, 2-15A Breaker
|
$1160.00
|
|
ME2012-20B
|
2000W, 12V, 100A
PFC charger, 2-20A Breaker
|
$1160.00
|
|
--
ME Series--
Reliable Mobile Power from
Magnum Energy
The ME Series Inverter/Charger
from Magnum Energy is a new
generation inverter designed
specifically for rugged mobile
applications. The ME Series is
powerful, easy-to-use, and best of
all, cost effective.
The ME Series
is ETL Listed to the stringent
requirements of UL/cUL 458 and
CSA C22.2 #107.1-01, ensuring
that the inverter is safe and reliable.
Install the ME
Series in four easy steps: simply
connect the inverter’s output
to your distribution circuits or
electrical panel, connect your shore
power cable (AC) to the inverter’s
easy-to-reach terminal block,
connect the batteries, and switch on
the power.
All ME Series Models
Feature:
- Power Factor Corrected (PFC) Charger: Uses less energy from a generator
than a standard charger – using
only 15 amps per 100 amps versus
23 amps used by standard chargers.
- Choices: The ME Series comes
in three power models, allowing
you to choose the model that is
right for you.
- Versatile mounting:
Mount the
ME Series on a shelf, bulkhead, or
even upside down.
- Lightweight: The lightweight
aluminum base and cover also
provides noise reduction and
corrosion resistance.
- Multiple ports: The ME Series provides multiple
ports, including an RS485
communication port for network
expansion, and a remote port.
- Accessible design: The extra large
AC access cover with terminal screw
block and 360° DC connection
terminals with covers make this
inverter more accessible when it
needs to be.
- Convenient switches: The ME Series comes with an on/
off inverter-mounted switch with
an easy-to-read LED indicator.
- Expanded transfer relay: 60 Amp transfer service is
available on all models.
- Buy with ease: The ME Series is
backed by a three-year (36-month)
limited warranty.
|
|
|
ME Series Accessories
ME-RC Remote Control
- Regular Price: $229.00
ME-AGS Auto Gen Start Module
- Regular Price: $329.00
ME-BMK Battery Monitor Kit
- Regular Price: $189.00
|
Battery Monitor Kit
Acts as "fuel gauge" for your battery bank.
 The Battery Monitor Kit* from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The Battery Monitor Kit includes the sense module, sense and communication cables, and a 500 amp shunt.
* The ME-BMK requires a Magnum Inverter with a "Network" port and a ME-RC remote with revision 2.0 or higher. |
ME-RC Remote Control
For convenient
finger-tip operation, including the
new one-knob™ programming.
 The ME-RC Remote Control is simple to use, yet allows full set-up of all the adjustable parameters available in the ME Series inverters. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revison 2.0 or higher remote) using a network connection to the inverter. This remote has convienient finger-tip operation, including the new one-knob programming.
Auto Gen Start (AGS)
Automatically starts
and stops your generator based on
temperature or battery voltage.
 The ME-AGS Auto Generator Start can automatically start your generator based on battery voltage or inside temperature. Starts most diesel or gas generators. Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock.
 click
here for information on DC inline fuses |
Electrical
Specifications - Inverter
|
| Model |
ME 2012 |
ME 2512 |
ME 3112 |
| Input battery voltage range |
9 - 16 VDC |
9 - 16 VDC |
9 - 16 VDC |
| Nominal AC output voltage |
120 VAC |
120 VAC |
120 VAC |
| Output frequency and accuracy |
60 Hz +/- 0.005% |
60 Hz +/- 0.005% |
60 Hz +/- 0.005% |
| 1 msec surge current (amps AC) |
60 |
100 |
120 |
| 100 msec surge current (amps AC) |
37 |
45 |
50 |
| 5 sec surge power (real watts) |
3700 |
5000 |
6000 |
| 30 sec surge power (real watts) |
3450 |
4500 |
4800 |
| 5 min surge power (real watts) |
3100 |
3500 |
3950 |
| 30 min surge power (real watts) |
2400 |
2900 |
3500 |
| Continuous power output at 45° C |
2000 VA |
2500 VA |
3100 VA |
| Rated input battery current |
191.0 ADC |
239.1 ADC |
296.5 ADC |
| Inverter efficiency (peak) |
95% |
91% |
90% |
Transfer time |
16 msecs |
16 msecs |
16 msecs |
Search mode |
0.2 ADC |
0.2 ADC |
0.2 ADC |
| No load (120 VAC output) |
0.87 ADC |
0.95 ADC |
0.97 ADC |
| Waveform |
Modified Sine Wave |
Modified Sine Wave |
Modified Sine Wave |
| |
Electrical
Specifications - Charger
|
| Model |
ME 2012 |
ME 2512 |
ME 3112 |
| Continuous output at 45° C |
100 A DC |
130 A DC |
160 A DC |
| Charger efficiency |
85% |
85% |
85% |
| Power factor |
> .95 |
> .95 |
> .95 |
| Input current at rated output
|
15 AAC |
18 AAC |
21 AAC |
| |
General
Specifications
|
| Model |
ME 2012 |
ME 2512 |
ME 3112 |
| Transfer relay capability |
2 legs at 30 A for 120 V/30 A or 240 V/60A service |
| Five stage charging capability |
Bulk, Absorb, Float, Equalize, and Battery Saver™ |
| Battery temperature compensation |
With available temp sensor (battery temp 0 – 50° C) |
| Remote inverter on/off switch |
With available pigtail to connect to dry contact |
| Internal cooling |
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
| Overcurrent protection |
Yes, with two overlapping circuits |
| Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
| Conformal coating on PCB’s for corrosion protection |
Yes |
| Powder coated chassis & top for corrosion protection |
Yes |
| Stainless steel fasteners for corrosion protection |
Yes |
| Dual AC branch rated output breakers |
Optional on the ME2012 - AC breakers in 15 or 20 amp ratings |
| Series stacking interface 120/240 V |
Yes |
| Listings |
ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 |
| Warranty |
Three (3) years |
| |
|
Environmental
Specifications
|
| Model |
ME 2012 |
ME 2512 |
ME 3112 |
| Operating temperature |
-20° C to +60° C (-4° F to 140° F) |
| Nonoperating temperature |
-40° C to +70° C (-40° F to 158° F) |
| Operating humidity |
0 to 95% RH non condensing |
| |
|
Physical
Specifications
|
| Model |
ME 2012 |
ME 2512 |
ME 3112 |
| Dimensions (H x W x D) |
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
| Mounting |
Shelf (top or bottom up) or bulkhead (vents up) |
| Weight |
38 lb (17 kg) |
42 lb (19 kg) |
45 lb (20 kg) |
| Max operating altitude |
15,000’ (4570 m) |
| |
|
|
|
Power
Inverters || Battery Chargers
|| Inverter Cables || Inverter
Accessories || AGM Batteries
Power
Inverter FAQ || Document
Library
About
Us || Contact Us || Privacy,
Security, Returns || Refer a Friend || Shipping
|| Site
Map || Home
donrowe.com
800-367-3019
sales@donrowe.com
P.O. Box 522, Monroe, Oregon 97456
Phone: 541-847-5782 || Fax: 541-847-6230
Hours: 8:00 am to 4:00 pm Pacific Time, Monday - Friday
© 2000-2010
~ All rights reserved ~ Powered by:
|
click
here for information on cables, or to purchase different size
cables