Product
Features:
- 1000-watt continuous output with 3000-watt surge
- 50-amp automatic three-stage battery charger
- Temperature-compensated charging provides optimal care of flooded lead-acid batteries
- Built-in 20-amp transfer switch automatically transfers between inverter power and AC power
- Ignition-protected for mounting in gas engine compartments
- Rugged, weatherproof aluminum enclosure
- Rigorously tested for industrial class vibration, emissions and environmental requirements
- Similar in size to a Group 31 battery
- Remote switch control
- Integrated sensor for temperature compensated charging
- Weatherproof AC wire harness
- Two-year warranty
Protection Features:
- Automatic over-temperature and over-current shutdown
- Intelligent low-voltage cut-out based on 10.6 volt DC threshold
 click
here for information on cables, or to purchase different
size cables
 click
here for information on DC fuses and holders
|
Ideal for applications in a small boat, or mounted on the frame rail of a heavy duty truck, the Xantrex IP1012 AL Inverter/Charger converts 12-volt DC battery power into 1000 watts of standard 120-volt AC household power. The unit allows the user to operate a small air conditioner, microwave or other appliances, electronics and tools from any dual-purpose battery bank. The built-in 50-amp battery charger quickly recharges batteries to full capacity in three automatic stages when the Xantrex IP1012 AL is connected to shorepower. While the batteries are charging, the system seamlessly feeds shorepower to any AC loads connected to the unit, and manages the incoming power automatically, preventing nuisance tripping of the shorepower breaker.
Certified for ignition protection, the Xantrex IP1012 AL can be safely mounted in the engine compartment of a small gas-powered boat, or in a battery box that’s mounted on a vehicle, freeing up valuable interior cabin space. Completely sealed to provide dust and water resistance, the rugged Xantrex IP1012 AL can be mounted in areas exposed to the elements, without damage to the unit.
IP1012 AL by Xantrex
805-1011
1000
watt 12 volt Inverter/Charger
(50 amp charger)
Regular Price: $1400.00
Our Price: $1285.00
|
|
Electrical
Specifications - Inverter
|
| Output power
(continuous) |
1000 watts |
| Surge Power |
3000 watts |
| Inverter Voltage
Regulation |
108 to 125 Vac (full range at 25°C) |
| Output frequency |
60 +/- 0.1 Hz |
| Output wave
form |
Modified Sine
Wave |
| Efficiency
(full load) |
90% |
| Peak efficiency |
93% |
| No load current
draw (idle mode) |
< 650 mADC |
| AC transfer switch |
20 A |
| |
Electrical
Specifications - Charger
|
| Charge rate
|
50 ADC |
| AC Input voltage
range |
100 - 130 VAC
|
| Battery voltage
(nominal) |
12 VDC |
| AC Input (max.
charge mode) |
13 AAC RMS |
| Absorption charge
voltage |
14.3 +/- 0.3 VDC |
| Float charge
voltage |
13.3 +/- 0.3 VDC |
| Battery charge outputs
|
One |
| Charge control |
Three-stage |
| Battery type
settings |
Flooded or AGM |
| Equalization |
No |
| Temperature sensitive charging |
Yes |
| |
General
Specifications
|
| Optimal operating
temperature range |
-40°F - 185 °F
(-40°C to 85 °C) Charger output de-rated above 30°C |
| Controls remotes |
Remote Switch |
| Dimensions
(H x W x L) |
8.56" x 7.25" x 13.00” |
| Weight |
40 lbs |
| Warranty |
Two years |
| Regulatory Compliance |
ABYC, Ignition protected, UL458 Marine, IP66 moisture and dust resistant enclosure, SAE J1455, FCC Class B |
|
