TRUECharge2 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, TRUECharge2 battery chargers feature low electrical interference and efficient, power factor corrected multistage charging. Thanks to their inherent drip-proof design characteristics, the TRUECharge2 chargers can be mounted in multiple positions.

Designed for recreational and commercial applications worldwide, TRUECharge2 accepts 90 - 265 Vac, 47-63 Hz which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUECharge2 20A, 40A and 60A 12V models can be augmented with an optional remote panel. Each models comes with built-in protection against surges and spikes on the AC power line.

New Parallel Feature:

TRUECharge2 20A, 40A and 60A are equipped with New Parallel Stacking feature. This allows two chargers to work together to combine the output current, achieving up to 120V for large battery banks. This requires the optional Remote Panel (part #808-8040-01).

Product Features:

• 12-volt models available in 20, 40 & 60 Amps
• Microprocessor-controlled, multistage charging algorithms
• Settings for two and three-stage charging
• Settings for flooded, gel, AGM or lead-calcium batteries
• Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
• Temperature-compensated charging
• Power factor corrected for efficient charging
• Battery-equalization feature
• Ability to charge batteries drained to extremely low voltage
• Can be parallel stacked for double output current capability
• Optional battery temperature sensor,
  Part #808-0232-01
• Optional remote panel, Part #808-8040-01

Protection Features:

• Reverse battery polarity protection
• Drip-proof design
• Over and under-temperature protection
• DC over-voltage protection
• Battery overcharging protection
• Ignition protection

Three-Stage Charging

Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:

- Bulk:  Replaces 70-80% of the battery’s state-of-charge at the fastest possible rate.
- Absorption:  Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.
- Float:  Voltage is reduced and held constant in order to prevent damage and maintain batteries at a full charge.

Power Factor Corrected (PFC)

Less shorepower is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shorepower breakers.

Options

The TRUECHARGE2 Remote Panel can be mounted up to 50ft (15m) away for remote control and monitoring.

The TRUECHARGE2 Battery Temperature Sensor (BTS) provides battery temperature voltage compensation from -13° to 158 °F (-25 to 70 °C)

  Download the TC2 installation guide
  Download the TC2 operation guide

  Download the TC2 20/40/60 spec sheet

Battery Temperature Sensor
Provides battery temperature voltage compensation from -13° to 158 °F.

The Battery Temperature Sensor (BTS) mounts on the terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation.

  Download the TC2 BTS user guide

TrueCharge2 Remote Panel
Advanced remote for monitoring and full control of battery charger performance.

The TrueCharge2 Remote Panel is a full-function remote that allows you to monitor and control battery charger performance from a remote location, including features not accessible from the charger's onboard display. The remote panel reads like a fuel gauge and displays critical information on charging of battery banks. It is very easy to install, read and operate, connecting with the battery charger through the included telephone cable. Includes 25ft cable and template and locknut for mounting.

Product Features:

• Gives the user flexibility to set maximum charger output current
• Can be used to operate two chargers in parallel to increase output capacity
• Allows the charger to be powered on or placed into standby while AC power is connected
• Programs the charger for battery type and temperature
• Displays faults and warnings, basic battery level and settings
• Displays the current status of each battery or each battery bank
• Simple push buttons to set charger mode
• Allows for activation and termination of equalization
• FCC Class B compliant
• Two year warrany

  Download the TC2 remote spec sheet