|


- Ideal for recharging and maintaining motorcycle,
ATV, snowmobile, personal watercraft, lawn tractor, compact car, minivan, SUV, RV and boat batteries
- 3-stage charging technology
minimizes recharging time
- 15 amp constant DC output
current
- 2 amp trickle charge setting
maintains batteries over long storage periods and during cold weather
- Selectable charge rate
to fit all battery sizes (2/8/15 Amp)
|
DURACELL CHARGER 15
2/8/15 AMP 12V Battery Charger
by Duracell 804-0157-07
Out of Stock
|

|
Features:
- Micro-processor controlled
three-stage charging extends battery life
- Easy-to-read LED display
for monitoring charging parameters
- Fault diagnostic tool for
quick battery troubleshooting
- Battery reconditioning
function reactivates dead flooded lead-acid batteries
- Short circuit and overcharge
protection for safe operation
- Built-in storage compartment
for charger cables
- Recharges all types of
lead acid 12V batteries
(excluding gel batteries)
- Compact and lightweight
design for convenient use at home and on the road
Three-stage Charging
Multistage charging ensures batteries receive optimum charging, but with minimal
wear and tear, regulating the voltage and current delivered to the batteries in
three automatic stages:
Bulk: Replaces 70-80%
of the battery's state of charge at the fastest possible rate.
Absorption: Replenishes the remaining 20-30% of charge, bringing the battery
to a full charge at a slow, safe rate.
Float: Voltage is reduced and held constant in order to prevent damage
and keep batteries at a full charge.
| Output
current |
2/8/15A |
|
Output voltage
(nominal, depending on settings): |
| -
Charge |
14.4
VDC |
| -
Float |
13.5
VDC |
|
- Equalize |
15.6 / 2A |
| AC
input voltage |
115 VAC,
50/60 Hz |
| Charger
efficiency |
80% approx. |
| Recommended
Battery type |
Sealed,
AGM,
lead acid |
| Recommended
Battery size |
6 - 50
Ah |
| Charging
Type |
3 stage |
|
# of Battery Bank Outputs |
1 |
| Reverse
Polarity Detection |
Yes |
| Overcharge
Protection |
Yes |
| Fault
diagnostic tool |
Error
code LED |
| Dimensions |
10.63'
x 5.12' x 7.09' |
| Weight
|
4.55
lbs |
| Shipping
Weight |
6 lbs |
| Warranty |
6 months |
| Regulatory Approvals |
ETL approved to CSA 107.2, UL 1236 |
|